Design concept of cable waterproof joint

1. Cable waterproof joint is a kind of product used to fasten wires and cables and reach a certain IP protection grade and tensile and torsional resistance

2. It is suitable for power incoming line, instruments, lighting fixtures, electrical boxes and other occasions that require the whole or part to meet the requirements of waterproof, dustproof and tensile strength

3. Compared with the traditional wire fastening products, our cable joints adapt to a wide range of cable outer diameter changes and have high protection grade

4. It can provide EMC, electromagnetic compatibility, explosion-proof and other special specifications

2、 Type selection guidance for cable waterproof joint:

1. Determine the IP protection grade that the cable joint needs to reach according to the use environment and requirements

2. Determine the material and color of cable joint according to the use environment and requirements

3. Determine the thread standard to be used

4. Select the bayonet range close to the outer diameter of the cable, +10% or so as the specific model

5. Generally, it is recommended to use O-ring to meet the technical standard

6. Whether other accessories are required; If there are special requirements, please refer to the optional accessories

7. If it is used in places with explosion or combustible gas, explosion-proof joint is required

8. If there are electromagnetic compatibility requirements, the shielded cable waterproof joint shall be selected

9. For other requirements, such as flat cable, double locking, etc., please refer to the specific specifications