The Plastic Drag Chain Produced By The Drag Chain Manufacturer Shall Be Maintained Regularly During Use. The Main Contents Of Maintenance Are: Inspection And Prevention Are The Main Contents. During Maintenance, Check The Relationship Of Accessories At Various Parts And Whether They Are Damaged, Repair The Damaged Parts, And Try To Maintain The Best State Of The Mold

As one of the professional manufacturers, Shanghai jiehui Industrial Co., Ltd. generally has 10, 15, 18, 20, 25, 30, 35, 45, 55, 65 and 80 types of plastic drag chains. The inner height, outer height and pitch of the same series of drag chains are the same, and the inner width and bending radius r of the drag chain can be selected differently. The manufacturer can customize the drag chain width according to the user's requirements, and the bending radius can range from 18 to 500. The material of plastic drag chain is generally nylon PA66. Because reinforced nylon is used, it has good pressure, toughness, high elasticity, wear resistance and certain flame retardance. It can stabilize the high and low temperature performance when using plastic drag chain, and can be used outdoors. Now the plastic drag chain is also constantly improving

The use of plastic drag chains originated in Germany and was later introduced and innovated in China. Now the drag chain has been widely used in machine tools, which not only protects the cables, but also makes the machine tools look more beautiful as a whole. Drag chain, rectangular metal tubing, protective sleeve, corrugated pipe and plastic coated metal tubing are all cable protection products. Drag chain is divided into steel drag chain and plastic drag chain. The steel drag chain is customized by the combination of steel and aluminum. The plastic drag chain is also known as engineering drag chain and tank chain

The intelligentization of machine tool includes on-line measurement, monitoring and compensation. The position detection and closed-loop control of CNC machine tools are simple application cases. In order to further improve the machining accuracy, the circular motion accuracy of the machine tool and the spatial position of the cutter head point can be compensated by entering the CNC system after being measured by the ball bar instrument and laser. The future CNC machine tools will be equipped with various micro sensors to monitor the errors caused by cutting force, vibration, thermal deformation, etc., and automatically compensate or adjust the working state of the machine tools to improve the working accuracy and stability of the machine tools

For machine tool drag chain/installation, use a suitable screwdriver to vertically insert the opening space at both ends of the cover plate, gently open the cover plate, assemble at both sides, put the protected items into the plastic drag chain according to the rules, and then cover the cover plate to assemble the upper parts. Before fixing, it is necessary to consider the expansion of the cable at the fixed end and the movable end of the wire